Class I Oil/water separator by coalescence, with two separation chambers, automatic closure device and oil filter

• Mineral oil and grease, and hydrocarbon separation from water by density difference and coalescence
• This unit does not separate emulsified oil and hydrocarbon

NOTE: For organic (restaurant oil and grease removal) oil and grease removal, please refer to Grease Separators.

• Model CHC-SH-L-2. Class I: outlet oil concentration lower than 5 ppm
• Designed in accordance with EN 858 Standard
• Equipment manufactured in GFRP (Glass Fiber Reinforced Polyester) with resins
• Oil and hydrocarbon separation and solids settling chambers
• Accumulation of oil and hydrocarbon on water surface
• Coalescing plates with large specific surface: 240m2/m3
• Oil filter and automatic closure device composed of float and closure system
• Oil removal through manhole
• PVC inlet and outlet pipes. Manhole with air vent to install a ventilation pipe
• Optional: oil and hydrocarbon detection alarm

The VESPA model allows the separation of suspended solids, fats and oils in wastewater.

• The main body is manufactured in GFRP with AISI
• 316L stainless steel components. The equipment is
  designed for easy transport in sea containers.
• With an appropriate preparation of the water to be treated, the performance of the equipment can be as high as:
  • BOD5 removal: 40% – 80%
  • COD removal: 60% – 80%.
  • Suspended solids, oils and grease removal: 90%